UNDER CONSTRUCTION:

PLEASE CONTACT YOUR DAYTONA ELEVATOR

REPRESENTATIVE TO SUBMIT ORDER DETAILS

Elevator Production Requirements
Pneumatic Vacuum Elevator

Model U237-220V

2 Stop Elevator

info@daytonaelevator,com

440 Spring Forest Dr.

New Smyrna Beach, Florida, 32168

Tel: 386/423-7226 Fax: 386/427-4763

Measurement Definitions:

It is absolutely critical to take into consideration the

complete measurement, surface-to-surface, unless

the lowest level floor covering (i.e. carpet, tile, hardwood )

is not going to be installed or if it will be removed

at the time of our elevator installation.
Home Owner Name:
     Customer Phone:

    Delivery Address:

Please Specify Measurements in Feet and/or Inches
                          H1 =

                           H2 =

                          T1 =

Door Options
Option A (All levels will have doors on same side)

Option B (1 of 2 levels will have a door open 180 degrees opposite of other two doors)

Door swings open to the left from inside elevator
Options Determined by Seller – Do not fill in
Split-System Pump Box for Attic

Additional 39” sections:

Additional adjustable cylinders:

NOTE: For accuracy purposes, measure lifting height (L1) first, then measure ceiling height, and then subtract to obtain floor thickness.

I certify that the information as listed above is correct to within ¼” for each measurement in order for us to order the elevator for the

correct lifting heights at each level. We will order your elevator based on the measurements and specifications listed on this sheet.

Any errors in information provided may be subject to addtional charges.
AUTHORIZED CUSTOMER NAME: